Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, and screws. These components are included in the Hard Drive Hardware Kit, spare part number 716179-001.

Description

Spare part number

 

 

1-TB, 5400-rpm, 9.5-mm for use on all computer models

676521-001

 

 

750-GB, 5400-rpm, 9.5-mm for use only on computer models equipped with an AMD processor

634250-001

 

 

750-GB, 5400-rpm, 9.5-mm for use only on computer models equipped with an Intel processor

644351-001

 

 

640-GB, 5400-rpm, 9.5-mm for use on all computer models

669300-001

 

 

500-GB, 5400-rpm, 9.5- and 7.0-mm for use only on computer models equipped with an

644683-001

AMD processor

 

 

 

500-GB, 5400-rpm, 9.5- and 7.0-mm for use only on computer models equipped with an

683802-001

Intel processor

 

 

 

320-GB, 5400-rpm, 9.5- and 7.0-mm for use only on computer models equipped with an

622643-001

AMD processor

 

 

 

320-GB, 5400-rpm, 9.5- and 7.0-mm for use only on computer models equipped with an

645193-001

Intel processor

 

 

 

Before removing the hard drive, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 46).

5.Remove the service cover (see Optical drive on page 47).

Remove the hard drive:

1.Remove the two Phillips PM2.5×5.75 screws (1) that secure the hard drive to the computer.

Component replacement procedures

49