![](/images/new-backgrounds/1152025/15202525x1.webp)
Cleaning the keyboard and | When cleaning the keyboard keys, use a low setting on a | |
mouse | cleaner, to avoid removing key caps and springs. | |
| 1. | Vacuum between the keys of the keyboard and along the grooves. |
| 2. | Use a clean, dry cloth and isopropyl (rubbing) alcohol to clean buildup on the |
|
| keyboard keys and along its edges. |
| 3. | Wipe the body of the mouse and the mouse cord by using cleaning wipes. |
|
| |
| If you have a | |
| 1. | Turn the mouse upside down, and rotate the |
|
| to remove the ring and release the roller ball. |
| 2. | Rinse the roller ball with soap and warm water. |
| 3. | Clean the rollers inside the mouse with a cotton swab dampened with |
|
| isopropyl (rubbing) alcohol. |
| 4. | After the roller ball and rollers are completely dry, replace the ball and ball- |
|
| cover ring. |
|
| |
Cleaning the screen (AiO | Follow these steps to clean the screen: | |
models only) | 1. | Turn off the computer. From the Start screen, move your cursor to the lower- |
| ||
|
| right corner of the screen to display the charms toolbar, and then select |
|
| Settings. Select the Power icon, and then select Shut down. |
| 2. | Disconnect the power cord from the wall. |
| 3. | Spray a small amount of mild glass cleaner on a soft cloth to clean the |
|
| screen. |
| 4. | Wipe the surface and left and right side of the screen to remove any dirt, |
|
| fingerprints, or other debris. |
CAUTION: Do not spray or place the cleaner directly on the screen; spray the cleaner into the cloth, and then wipe the sides and surface of the screen.
Do not use an abrasive cleaner or cloth when cleaning the sides or the surface of the screen, because this could cause damage to the screen.
Cleaning procedures | 9 |