Note

The SDRAM door on HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 models is located in the rear left corner of the notebook bottom, as indicated in Figure 2-4. The procedure for removing the SDRAM door and modules is the same for all notebook models.

Figure 2-4. Removing an SDRAM Module

HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 Models

Reassembly Notes

Carefully press the SDRAM module into the connector at an angle of about 30°, until it is fully inserted. Then press down on both sides of the SDRAM module until the latches snap closed.

2-6

Removal and Replacement

Service Manual