Replacing Small Parts

(User-Replaceable)

The user can replace the following small parts.

 

Table 2-4. Replacing Small Parts

 

 

Part

Replacement Procedure

Rubber screw plugs,

Insert a small flat-blade screwdriver under the rubber screw plug and pry it

display (on display bezel)

loose. To replace, firmly press the adhesive side of the screw plug into the

 

recess.

Door, mini-PCI

On the bottom of the notebook, loosen the screws that secure the mini-PCI

 

door to the bottom case and then remove the door.

Door, memory

On the bottom of the notebook, loosen the screws that secure the SDRAM

 

module door to the bottom case and then remove the door.

Feet, rubber (on bottom of

Insert a small flat-blade screwdriver under the foot and pry it loose. To replace,

notebook)

firmly press the adhesive side of the foot into the recess.

Rubber cover, docking port

Grasp the rubber docking port cover with your fingers and gently remove it. To

(XE4500 only)

replace, firmly press the docking port cover into the opening in the bottom

 

case.

Cover, modem port

Insert a small flat-blade screwdriver at the top of the cover and gently pry it

 

loose. To replace, insert the cover into the modem port opening.

Service Manual

Removal and Replacement

2-11