HP Figure 9-1.The System Information Screen (Default Values)

Time Protocols

SNTP: Viewing, Selecting, and Configuring

Time Protocol Selection Parameter

– TIMEP

– SNTP

– None

Figure 9-1. The System Information Screen (Default Values)

2.Press [E] (for Edit). The cursor moves to the System Name field.

3.Use [v] to move the cursor to the Time Sync Method field.

4.Use the Space bar to select SNTP, then press [v] once to display and move to the SNTP Mode field.

5.Do one of the following:

•Use the Space bar to select the Broadcast mode, then press [v] to move the cursor to the Poll Interval field, and go to step 6. (For Broadcast mode details, see “SNTP Operating Modes” on page 9-2.)

•Use the Space bar to select the Unicast mode, then do the following:

i. Press [>] to move the cursor to the Server Address field.

9-6