HP CommunityOperatorReadOnly, CommunityOperatorReadWrite, Table 13-1.SNMP Community Features, Figure 13-4.Assigning a Community to a Group Access Level

Configuring for Network Management Applications

Using SNMP Tools To Manage the Switch

Figure 13-4shows the assigning of the Operator community on MgrStation1 to the CommunityOperatorReadWrite group. Any other Operator only has an access level of CommunityOperatorReadOnly.

Add mapping to allow write access for

Operator community on MgrStation1

Two Operator Access Levels

Figure 13-4. Assigning a Community to a Group Access LevelTable 13-1. SNMP Community Features

Feature	Default	Menu	CLI	Web
show SNMP communities	n/a	page	page	—
		13-14	13-16
configure identity information	none	—	page
			13-17
configure community names	public	page	page	—
MIB view for a community name		13-14	13-17
(operator, manager)	manager	“	“
write access for default		“	“
community name	unrestricted	“	“

Use SNMP communities to restrict access to the switch by SNMP management stations by adding, editing, or deleting SNMP communities. You can configure up to five SNMP communities, each with either an operator-level or a manager- level view, and either restricted or unrestricted write access.

Using SNMP requires that the switch have an IP address and subnet mask compatible with your network.

13-13