Send a fax
You can send a fax in a variety of ways. Using the printer control panel, you can send a black and white fax or a color fax. You can also send a fax manually from an attached phone. This allows you to speak with the recipient before sending the fax.
This section contains the following topics:
●Send a standard fax
●Send a standard fax from the computer
●Send a fax manually from a phone
●Send a fax using monitor dialing
●Schedule a fax to send later
●Send a fax in Error Correction Mode
Send a standard fax
You can easily send a single- or
NOTE: If you need to print confirmation that your faxes were successfully sent, fax confirmation
must be enabled.
TIP: You can also send a fax manually from a phone or by using monitor dialing. These features 
allow you to control the pace of your dialing. They are also useful when you want to use a calling card to charge the call and you have to respond to tone prompts while dialing.
To send a standard fax from the printer control panel
1.Load the original
For more information about loading the original, see Load original on page 24.
2.From the Home screen on the printer display, press the Up and Down buttons to select Fax, and then press OK.
3.Select Black Fax or Color Fax.
If an original is loaded in the ADF, the document is sent to the number you entered. If no original is detected in the ADF, a message appears that promts you to make a selection.
TIP: If the recipient reports issues with the quality of the fax you sent, you can try changing the 
resolution or contrast of your fax.
4.Enter the fax number by using the keypad, and then press OK.
TIP: To add a pause in the fax number you are entering, press * repeatedly, until a dash 
appears on the display.
34 Chapter 6 Fax | ENWW |
