IPv6 Addressing Configuration
View IPv6 Gateway, Route, and Router Neighbors
ProCurve(config)# show ipv6 route |
|
| ||||||||||||
|
|
|
|
|
|
|
|
| IPv6 Route Entries |
|
| |||
Dest : ::/0 |
|
|
|
|
|
|
|
|
|
| Type : static | |||
| “Unknown” Address |
|
|
|
|
|
| |||||||
Gateway : | fe80::213:c4ff:fedd:14b0%vlan10 | Dist. : 40 | Metric : 0 | |||||||||||
Dest : ::1/128 |
|
|
|
|
|
|
|
|
| Type : connected | ||||
| Loopback Address |
|
|
|
|
| ||||||||
Gateway : | lo0 |
|
|
|
|
|
|
|
|
|
| Dist. : 0 | Metric : 1 | |
|
|
|
|
|
|
|
|
|
| |||||
Dest : 2001:db8:a03:e102::/64 |
|
|
|
|
| Type : connected | ||||||||
| Global Unicast Address | Dist. : 0 | ||||||||||||
Gateway : VLAN10 |
|
|
|
|
|
| Configured on the Switch | Metric : 1 | ||||||
Dest : fe80::%vlan10 |
|
|
|
| Type : connected | |||||||||
|
| Dist. : 0 | ||||||||||||
Gateway : VLAN10 |
|
|
| Configured on the Switch |
| Metric : 1 | ||||||||
Dest : fe80::1%lo0 |
|
|
|
| Type : connected | |||||||||
|
|
| Dist. : 0 | |||||||||||
Gateway : | lo0 |
|
|
| to the Loopback Address |
| Metric : 1 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Viewing IPv6 Router Information
Syntax: show ipv6 routers [ vlan < vid > ]
This command lists the switch’s IPv6 router table entries for all VLANs configured on the switch or for a single VLAN. This output provides information about the IPv6 routers from which routing advertisements (RAs) have been received on the switch.
vlan < vid >: Optional. Specifies only the information on IPv6 routers on the indicated VLAN.
Router Address: The IPv6 address of the router interface.
Preference: The relative priority of prefix assignments received from the router when prefix assignments are also received on the same switch VLAN interface from other IPv6 routers.
Interface: The VLAN interface on which the path to the router exists.