IPv6 Addressing Configuration

View the Current IPv6 Addressing Configuration

ProCurve(config)#

show ipv6 vlan 10

Internet (IPv6) Service

IPv6 Routing

: Disabled

Default Gateway

: 10.0.9.80

ND DAD

: Enabled

DAD Attempts

: 3

Vlan Name

: VLAN10

IPv6 Status

: Enabled

IPv6 Address/Prefixlength

Expiry

 

 

-------------------------------------------

-------------------------

2620:0:a03:e102::127/64

Wed

Jan 23

14:16:17

2008

2620:0:a03:e102:212:79ff:fe88:a100/64

Sat

Jan 5

05:02:22

2008

fe80::127/64

permanent

 

 

Figure 4-2. Example of Show IPv6 VLAN < vid > OutputSyntax: show run

In addition to the other elements of the current configuration, this command lists the statically configured, global unicast and anycast IPv6 addressing, and the current IPv6 configura­ tion per-VLAN. The listing may include one or more of the following, depending on what other IPv6 options are config­ ured on the VLAN. Any stateless address autoconfiguration (SLAAC) commands in the configuration are also listed in the output, but the actual addresses resulting from these commands are not included in the output.

■ipv6 enable

■ipv6 address fe80::< device-id> link-local

■ipv6 address < prefix >:< device-id >/< prefix-length >

■ipv6 address autoconfig

■ipv6 address dhcp full [rapid-commit]

■ipv6 < global-unicast-address >/< prefix > anycast

4-25