IPv6 Management Security Features
Authorized IP Managers for IPv6
The next IPv6 command authorizes
ProCurve(config)# ipv6
The following ipv6
ProCurve(config)# ipv6
Editing an Existing Authorized IP Manager Entry. To change the mask or access level for an existing authorized IP manager entry, enter the IPv6 address with the new value(s). Any parameters not included in the command are reset to their default values.
The following command replaces the existing mask and access level for IPv6 address 2001:DB8::231:17FF:FEC5:C967 with FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FF00 and operator:
ProCurve(config)# ipv6
The following command replaces the existing mask and access level for IPv6 address 2001:DB8::231:17FF:FEC5:3E61 with FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF and manager (the default values). Note that it is not necessary to enter either of these parameters:
ProCurve(config)# ipv6
Deleting an Authorized IP Manager Entry. Enter only the IPv6 address of the configured authorized IP manager station that you want to delete with the no form of the command; for example:
ProCurve(config)# no ipv6