Multicast Listener Discovery (MLD) Snooping
Displaying MLD Status and Configuration
Displaying MLD Status andConfigurationCurrent MLD Status
Syntax: show ipv6 mld
Displays MLD status information for all VLANs on the switch that have MLD configured.
show ipv6 mld vlan <vid>
Displays MLD status for the specified VLAN
For example, a switch with MLD snooping configured on VLANs 8 and 9 might show the following information:
ProCurve# | show ipv6 mld |
|
MLD Service Protocol Info |
| |
Total vlans with MLD enabled | : 2 | |
Current | count of multicast groups joined | : 37 |
VLAN ID | : 8 |
|
VLAN NAME : VLAN8 |
| |
Querier | Address : fe80::218:71ff:fec4:2f00 [this switch] | |
Querier | Up Time : 1h:37m:20s |
|
Querier | Expiry Time : 0h:1m:44s |
|
Ports with multicast routers : |
|
|
Active Group Addresses | Type ExpiryTime | Ports |
ff02::c | FILT 0h:4m:9s | |
ff02::1:2 | FILT 0h:4m:3s | A21 |
ff02::1:3 | FILT 0h:4m:9s | |
ff02::1:ff00:42 | FILT 0h:4m:0s | A19 |
ff02::1:ff02:2 | FILT 0h:4m:2s | A15 |
ff02::1:ff02:3 | FILT 0h:4m:5s | A16 |
ff02::1:ff03:2 | FILT 0h:4m:2s | A17 |
ff02::1:ff03:3 | FILT 0h:4m:5s | A18 |
Figure