1 Connecting to a Netware 3.12 Server
Windows for Workgroups
Windows for Workgroups
1 Connecting to a Netware 3.12 Server
Requirements
•HP Vectra with DOS and
•3COM Etherlink
•DOS and
•Novell Netware server 3.12 that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
•Netware client for DOS and
Device Configuration
|
|
| Vectra VL8 |
| Vectra VL7 |
| Vectra VE7/VE8 |
|
|
|
|
|
|
|
|
| |
I/O Base Address |
| 210 |
| 210 |
| 300 |
| |
|
|
|
|
|
|
|
| |
Interrupt Request |
| 10 |
| 10 |
| 10 |
| |
Level |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• | Boot PROM |
|
|
| Disabled | |||
• | Transceiver Type |
| Auto Select | |||||
• | Network Driver Optimization |
| Windows or OS/2 Client | |||||
• | Maximum Modem Speed |
| 9600 Bps | |||||
• Plug and Play Compatibility |
| Disabled | ||||||
• | Full Duplex |
|
|
| Disabled | |||
Procedure
1With the HP Vectra turned off install the 3COM Etherlink III
2Power on the machine and allow it to boot to a DOS prompt.
3Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM’s website) and execute 3C5X9CFG.EXE.
