2 Connecting to a Netware 4.11 Server

Windows 95 SR2

Windows 95 SR2

Requirements

 

• HP Vectra with Windows 95 SR2 installed.

 

• 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.

 

Vectra VL8 and VE7/VE8 Driver Name : W95EL5X9.INF Size: 16KB

 

Date: 6/11/97

 

• Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96

 

• Windows 95 SR2 media.

 

• Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX,

 

and NWLink NetBIOS transfer protocols.

Device Configuration

 

 

 

Vectra VL8

 

Vectra VL7

 

Vectra VE7/VE8

 

 

 

 

 

 

 

 

 

I/O Base Address

 

210

 

210

 

300

 

 

 

 

 

 

 

 

 

Interrupt Request

 

10

 

10

 

10

 

 

Level

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

Boot PROM

 

 

 

Disabled

•

Transceiver Type

 

Auto Select

•

Network Driver Optimization

 

Windows or OS/2 Client

•

Maximum Modem Speed

 

9600 Bps

• Plug and Play Compatibility

 

Disabled

•

Full Duplex

 

 

 

Disabled

Procedure

1With the HP Vectra turned off install the 3COM Etherlink III 3C509-B adapter card into an ISA slot.

2Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.

3Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM’s website) and execute 3C5X9CFG.EXE.

4Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “Device Configuration.”

5If changes are required, save those changes and exit.