1 Connecting to a Netware 3.12 Server

Windows for Workgroups

9Select 16-bit LAN Drivers and hit the enter key.

10Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER” and hit enter.

11Insert the 3COM Etherlink 3C509 Ethernet card and drivers disk, set the path to “A:\NWCLIENT\” and press enter.

12Select “3Com Etherlink III Parallel Tasking Family” and press enter.

13Accept the default settings, press “F10” to continue, and verify the following entries for the “Installation Configuration Summary”:

❒YES

❒C:\NOVELL\CLIENT32

❒C:\WINDOWS

❒16-bit LAN drivers

❒3Com Etherlink III Parallel Tasking Family

14Press “F10” to save and continue.

15When prompted, insert the corresponding disks to complete file transfer and driver installation.

16When the install utility is finished, press <CRTL><ALT><DEL> to restart the machine.

17After windows loads, open the “NETWORK” folder, double-click the “NETWORK SETUP” icon.

18Select “Networks”, and verify that “Novell Netware (Workstation Shell 4.0 and above)” is listed under “Install Windows support for the following network only:” and click on “OK.”