Use the Security dialog box to lock your console switch with password protection, set or change the password, and enable the screen saver. If a password has been previously set, you must enter the password before you can access the Security dialog box. You do not have to set a screen saver password.

To access the Security dialog box, click Main>Setup>Security. The Security dialog box appears.

Setting and changing the console switch password

1.From the Security dialog box ("Setting local console switch security" on page 37), double-click the New field.

2.Enter the new password in the New field, and then press the Enter key. A valid password must be alphanumeric and be five to 15 characters in length. Permitted characters are case-sensitive and can consist of A–Z, 0–9, spaces, and hyphens.

3.In the Repeat field, re-enter the password and press the Enter key.

4.Click OK to change the password.

Local port operation 38

Page 38
Image 38
HP 409054-003 manual Setting and changing the console switch password