
If the OSD is not open, move the mouse or press any key on the keyboard. Scanning stops at the currently selected server.
From the Commands dialog box, deselect Scan Enable. Any active connections on the local port are disconnected.
Using preemption
Preemption provides a means for users with sufficient access level to take control of a server from another (remote or local) user who has a lesser or equal access level. Depending on the access level of the user issuing the preemption request and that of the user being preempted, the preemption request can be rejected. The Override Admin account is treated as a Console Switch Administrator in the following table.
User level | Preempted by | Can the preemption |
|
| be rejected? |
|
|
|
Local user | Console Switch | Yes |
| Administrator (Override |
|
| Admin) |
|
|
|
|
Console Switch | Local user | Yes |
Administrator |
|
|
(Override Admin) |
|
|
|
|
|
Console Switch | Console Switch | Yes |
Administrator | Administrator (Override |
|
(Override Admin) | Admin) |
|
|
|
|
Remote user | Local user | No |
|
|
|
Remote user | Console Switch | No |
| Administrator (Override |
|
| Admin) |
|
|
|
|
Assigning a preempt timeout
1.From the Main dialog box ("Accessing the Main dialog box" on page 28), click Setup>Preempt. The Preempt dialog box appears.
2.Enter a value in the Timeout Seconds field, and click OK.