![](/images/backgrounds/285757/hp-procurve-2600-series-users-manual-550038262x1.png)
Configuring and Monitoring Port Security
Reading Intrusion Alerts and Resetting Alert Flags
The Intrusion Alert column shows “Yes” for any port on which a security violation has been detected.
Figure2. Type [I] (Intrusion log) to display the Intrusion Log.
MAC Address of Intruding Device on Port A3
System Time of Intrusion on Port A3
Indicates this intrusion on port A3 occurred prior to a reset (reboot) at the indicated time and date.
The above example shows two intrusions for port A3 and one intrusion for port A1. In this case, only the most recent intrusion at port A3 has not been acknowledged (reset). This is indicated by the following:
•Because the Port Status screen (figure
•Since the switch can show only one uncleared intrusion per port, the older intrusion for port A3 in this example has also been previously reset.