![](/images/backgrounds/285757/hp-procurve-2600-series-users-manual-550038244x1.png)
Configuring and Monitoring Port Security
Port Security Command Options and Operation
Although the Address Limit is set to 2, only one device has been authorized for this port. In this case you can add another without having to also increase the Address Limit.
The Address Limit has not been reached.
FigureWith the above configuration for port A1, the following command adds the
ProCurve(config)#
After executing the above command, the security configuration for port A1 appears as:
|
|
|
|
|
|
|
|
|
| The Address Limit has been |
|
|
|
|
| reached. |
|
|
|
|
|
| |
|
|
| |||
| Figure | ||||
|
|
|
|
|
|
Note |
|
| The message Inconsistent value appears if the new MAC address exceeds the | ||
|
|
| current Address Limit or specifies a device that is already on the list. If you | ||
|
|
| change a port from static to continuous learn mode, the port retains in memory | ||
|
|
| any authorized addresses it had while in static mode. If you subsequently | ||
|
|
| attempt to convert the port back to static mode with the same authorized | ||
|
|
| address(es), the Inconsistent value message appears because the port | ||
|
|
| already has the address(es) in its “Authorized” list. | ||
|
|
|
|
|
|