HP 6108, 4100gl, 2650 (J4899A/B), 2626 (J4900A/B), 2600-PWR Configuring and Monitoring Port Security

Configuring and Monitoring Port Security

Operating Notes for Port Security

LACP Not Available on Ports Configured for Port Security. To main- tain security, LACP is not allowed on ports configured for port security. If you configure port security on a port on which LACP (active or passive) is configured, the switch removes the LACP configuration, displays a notice that LACP is disabled on the port(s), and enables port security on that port. For example:

ProCurve(config)# port-security e a17 learn-mode static address-limit 2

LACP has been disabled on secured port(s). ProCurve(config)#

The switch will not allow you to configure LACP on a port on which port security is enabled. For example:

ProCurve(config)# int e a17 lacp passive

Error configuring port A17: LACP and port security cannot be run together.

ProCurve(config)#

To restore LACP to the port, you must remove port security and re-enable

LACP active or passive.

9-38