Configuring and Monitoring Port Security
Web: Displaying and Configuring Port Security Features
Web: Displaying and Configuring Port Security Features1.Click on the Security tab.
2.Click on [Port Security].
3.Select the settings you want and, if you are using the Static Learn Mode, add or edit the Authorized Addresses field.
4.Implement your new data by clicking on [Apply Changes].
To access the
Notice of Security Violations
When the switch detects an intrusion on a port, it sets an “alert flag” for that port and makes the intrusion information available as described below. While the switch can detect additional intrusions for the same port, it does not list the next chronological intrusion for that port in the Intrusion Log until the alert flag for that port has been reset.
When a security violation occurs on a port configured for Port Security, the switch responds in the following ways to notify you:
■The switch sets an alert flag for that port. This flag remains set until:
•You use either the CLI, menu interface, or web browser interface to reset the flag.
•The switch is reset to its factory default configuration.
■The switch enables notification of the intrusion through the following means:
•In the CLI:
–The show–The log command displays the Event Log