HP 6108, 4100gl, 2650 (J4899A/B), 2626 (J4900A/B), 2600-PWR manual To enable SSH on the switch

Configuring Secure Shell (SSH)

Configuring the Switch for SSH Operation

SSH Client Contact Behavior. At the first contact between the switch and an SSH client, if you have not copied the switch’s public key into the client, your client’s first connection to the switch will question the connection and, for security reasons, give you the option of accepting or refusing. As long as you are confident that an unauthorized device is not using the switch’s IP address in an attempt to gain access to your data or network, you can accept the connection. (As a more secure alternative, you can directly connect the client to the switch’s serial port and copy the switch’s public key into the client. See the following Note.)

N o t e	When an SSH client connects to the switch for the first time, it is possible for
	a "man-in-the-middle" attack; that is, for an unauthorized device to pose
	undetected as the switch, and learn the usernames and passwords controlling
	access to the switch. You can remove this possibility by directly connecting
	the management station to the switch’s serial port, using a show command to
	display the switch’s public key, and copying the key from the display into a
	file. This requires a knowledge of where your client stores public keys, plus
	the knowledge of what key editing and file format might be required by your
	client application. However, if your first contact attempt between a client and
	the switch does not pose a security problem, this is unnecessary.

To enable SSH on the switch.

1.Generate a public/private key pair if you have not already done so. (Refer to “2. Generate the Switch’s Public and Private Key Pair” on page 6-10.)

2.Execute the ip ssh command.

To disable SSH on the switch, do either of the following:

■Execute no ip ssh.

■Zeroize the switch’s existing key pair. (page 6-11).

Syntax: [no] ip ssh

Enables or disables SSH on the switch.

[key-size < 512 768 1024 >] Version 1 only

The size of the internal, automatically generated key the switch uses for negotiations with an SSH client. A larger key provides greater security; a smaller key results in faster authentication (default: 512 bits).

6-16