
Removal and replacement procedures
USB board
Description | Spare part number |
|
|
USB board (includes cable) | |
|
|
Before removing the USB board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Remove the following components:
a.Hard drive (see “Hard drive” on page
b.Memory/wireless module compartment cover (see “WLAN module” on page
c.Optical drive (see “Optical drive” on page
d.Keyboard and switch cover (see “Keyboard and switch cover” on page
e.Palm rest (see “Palm rest” on page
f.Display assembly (see “Display assembly” on page
g.Top cover (see “Top cover” on page
Remove the USB board:
1.Disconnect the USB board cable 1 from the system board.
2.Detach the USB board cable 2 from the base enclosure. (The USB board cable is attached to the base enclosure with
3.Remove the USB board 3 and cable.
Reverse this procedure to install the USB board.
Maintenance and Service Guide |