Removal and replacement procedures

19.If it is necessary to replace the WLAN wireless antenna transceivers and cables:

a.Detach the transceivers 1 from the display enclosure. (The transceivers are attached to the enclosure with double-sided tape.)

b.Release the WLAN wireless antenna cables 2 from the clips and routing channel built into the left side of the display enclosure.

c.Remove the WLAN wireless antenna transceivers and cables. The wireless antenna transceivers and cables are included in the Display Cable Kits, using the following spare part numbers:

577228-001—for use only on computer models equipped with WWAN capability

578365-001—for use only on computer models not equipped with WWAN capability

4–34

Maintenance and Service Guide

Page 79
Image 79
HP 4311S manual Removal and replacement procedures