Removal and replacement procedures

9.Remove the keyboard.

10.Release the ZIF connector 1 to which the LED board cable is attached, and then disconnect the LED board cable 2 from the system board.

11.Detach the LED board cable 3 from the top cover. (The LED board cable is attached to the top cover with double-sided tape.)

12.Disconnect the speaker cable 4 from the system board.

13.Remove the switch cover 5.

Reverse this procedure to install the keyboard and switch cover.

Maintenance and Service Guide

4–23

Page 68
Image 68
HP 4311S manual Removal and replacement procedures