HP 4500 - G510n, 4500 - G510g manual Example of a parallel splitter

Since your computer dial-up modem shares the phone line with the device, you cannot use both your modem and the device simultaneously. For example, you cannot use the device for faxing if you are using your computer dial-up modem to send an e-mail or access the Internet.

There are two different ways to set up the device with your computer based on the number of phone ports on your computer. Before you begin, check your computer to see if it has one or two phone ports.

•If your computer has only one phone port, you will need to purchase a parallel splitter (also called a coupler), as shown below. (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.)

Example of a parallel splitter

•If your computer has two phone ports, set up the device as described below.

Back view of the device

1

2

3

4

5

Telephone wall jack

Use the phone cord supplied in the box with the device to connect to the 1-LINE port

You might need to connect the supplied phone cord to the adapter provided for your country/region.

Parallel splitter

Computer with modem

Telephone

To set up the device on the same phone line as a computer with two phone ports

1.Remove the white plug from the port labeled 2-EXT on the back of the device.

2.Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the device.

3.Connect a phone to the "OUT" port on the back of your computer dial-up modem.

Set up faxing (parallel phone systems) 195