Appendix D

Set up the device for wireless communication (some models only)

You may set up the device for wireless communication using one of the following ways:

Setup methodInfrastructureAd hoc wireless

 

wirelesscommunication*

 

communication

 

USB cable

 

 

For more information, see To set up wireless

 

 

communication using the installer (Mac OS X) or To

 

 

set up wireless communication using the installer

 

 

(Windows).

 

 

Device control panel

 

 

 

 

 

* An ad hoc network can be set up using the Wireless Connection Utility on the HP software CD.

NOTE: If you encounter problems, see Solve wireless problems (some models only).

To use the device with any wireless connection, you must run the installation program at least once from the HP software CD and create a wireless connection.

Make sure the device is not connected to the network using a network cable.

The sending device must have built-in 802.11 capabilities or an 802.11 wireless card installed. The device and the computers that use it must be on the same subnet.

Before installing the device software, you may wish to find out the settings of your network. Obtain the information from your system administrators, or complete the following tasks:

Obtain your network's network name or Service Set Identifier (SSID) and communication mode (infrastructure or ad hoc) from the configuration utility for the network's wireless access point (WAP) or the computer's network card.

Find out the type of encryption your network uses, such as Wired Equivalent Privacy (WEP).

Find out the security password or encryption key of the wireless device.

This section contains the following topics:

Understand 802.11 wireless network settings

To set up wireless communication using the device control panel with wireless setup wizard

To set up wireless communication using the installer (Windows)

To set up wireless communication using the installer (Mac OS X)

Connect the device using an ad hoc wireless network connection

To turn off wireless communication

To print a wireless test page

Reset wireless settings

Change the connection method

Guidelines for ensuring wireless network security

Guidelines for reducing interference on a wireless network

Understand 802.11 wireless network settingsNetwork name (SSID)

By default, the device looks for the wireless network name or SSID named "hpsetup." Your network may have a different SSID.

Communication mode

200 Network setup (some models only)