HP 6000 manual Linear, LinMag LogMag

Chapter 4 - Using the Data Processing Feature	Data Processing Feature
Using the Measurement Calculator / Register Math Function.	Contd.
Clip Function

Use this to create a threshold level. A ZERO value clip causes software to ignore clipping and resume normal calculator mode.

For example lets say the you wish to not include data points smaller than some low level value such as <-50dBM.

Enter the value -50 into the constant window aUnderstanding the Register Math Functions nd highlight “Clip”. This will operate on only the data from the first set (left of the +-*/). Any magnitude values LESS that the clip value will be set EQUAL to the clip value.

Notice: the plotting functions will be affected by the clip value. Use this to scale and expand the plots. Notice also that the calculator can be used to change the plot scales from linear to log or to add offset to measurements.

TERM 1 MULTIPLIER	Works with
LINEAR	+,-
linMag	+,-,*,/
LogMag	+,-,*,/

TERM 2 MULTIPLIER All functions above plus Constant

IMPORTANT: Not all combinations of Math are possible. Be sure you have the same size data array

46