HP 6000 manual Measurement Settings

Chapter 2 - Software Overview Measurement Settings

Measurement Settings

Receive Instrument -Spctrum Analyzer Settings

Bandwidth- Sets the bandwidth window on the spectrum analyzer , the smaller the window the faster the sweep. Format is in GHz.

Resolution-Sets the Frequency Resolution of the spectrum analyzer sweep. Inplut format is in MHz.

Trigger Mode- Changes the way the power meter reads the sensor, this setting is only applied to certain meters.

Trigger Delay- This sets the delay / Settling time between when the Signal generator is called and the power meter is queried for a reading. format is in seconds. Example: 1/10 second = .10

Sweep Delay- this sets the number of seconds the signal generator will wait before initiating the sweep. this allows larger antennas a chance to completely stop moving.

25