Savin 5450, 3350DNP manual Program-Storing Your Print Settings In Memory, Storing Your Settings

OPERATION

Program—Storing Your Print Settings In Memory

1	You can store up to 9 frequently used
	print job settings in machine memory
	and recall them for future use.

Note

❒The stored programs are not cleared when you turn off the main switch.

❒The stored programs cannot be de- leted. If you want to change a stored program, overwrite it.

Storing Your Settings

A Set the print settings you want to put into memory.

B Press the {Program} key.

Program	Clear Modes
	Auto Cycle
	Proof
	Print
	Enter
	Start
Clear/Stop
	TPES190N

C Select [Store] with the [→] or {}} key.

TPES570E

Note

❒The program numbers (1 to 9) will be displayed in the panel display.

❒If a user program has been pro- tected, that program number will not appear in the display.

To change a protected user pro- gram, see ⇒ P.73 “Protecting A Program”.

❒If all the user programs have been protected, you cannot store any settings. Press the

[Cancel] key.

E Select the program number you want to store the settings in with the [←], [→], {~}, or {}} key.

TPES530E

Note

❒You can also select the program number with the Number keys.

F Press the [OK] key.

Note

❒If this program number is al- ready used, the machine asks whether you wish to overwrite it or not. Press the [Yes] or [No] key.

D Press the [OK] key.

72