Savin 3350DNP, 5450 manual Printing Using The Optional Document Feeder, Originals

2. OPTIONAL FUNCTIONS

Printing Using The Optional Document Feeder

Insert a stack of originals in the docu- ment feeder. It will be fed automati- cally.

Originals

Setting the following originals in the document feeder might cause origi- nal misfeeds or damage to the origi- nals.

Set the following kinds of originals on the exposure glass (contact glass).

•Originals heavier than 105 g/m2, 27 lb

•Originals lighter than 52 g/m2, 14 lb

•Originals smaller than 105 mm × 128 mm, 4.2" × 5.1"

•Originals larger than 297 mm × 864 mm, 11.6" × 33.8"

•Stapled or clipped originals

•Perforated or torn originals

•Curled, folded, or creased origi- nals

•Originals with any kind of coating, such as thermal fax paper, art pa- per, aluminum foil, carbon paper, or conductive paper

•Bound originals such as books

•Damaged originals

•Originals with glue on them

•Pasted originals

•Originals written in pencil

•Thin originals that have low stiff- ness

•Originals with index tabs

•Translucent paper

The following original sizes set in the document feeder can be detected.

Metric version	A3 L, B4 L, A4 KL,
	B5 KL, A5KL
Inch version	11" × 17" L, 81/2" × 14"
	L, 81/2" × 11"KL,
	81/2" × 51/2"KL

Under the following conditions, the machine might not detect the origi- nal. In this case, select the original im- age area with the {Edge Erase} key. See ⇒ P.40 “Edge Erase—Erasing Edge Margins”.

•When you use originals with index tabs.

•When you use OHP transparencies or translucent paper.

•When you use dark originals.

•When you use originals with solid images.

•When you use originals other than the sizes described above.

Note

❒Set originals after correction fluid and ink have completely dried. Not taking this precaution could mark the exposure glass (contact glass) and cause marks to be print- ed.

81