Savin 5450, 3350DNP manual 100, Designated area Area recognized Preferred designated area

2

OPTIONAL FUNCTIONS

-Notes about drawing a command sheet

The image might differ depending on how the designated area is drawn, so re- member the following when making the command sheet:

Designated area	Area recognized	Preferred designated area
Part of the designated area		Make a space of at least 2 mm,
is surrounded by 3 sides of		0.08", in front of the area sur-
the entire area.		rounded by 3 sides (relative to
		the feed direction).
		1	2

		1, 2 = 2 mm, 0.08"
Double line pattern.	Only the outer line is	Make a gap of at least 2 mm, 0.08"
	recognized.	in width.

The designated area is sur-		Make a space of at least 2 mm,
rounded by 3 sides of an-		0.08" in front of the area sur-
other designated area.		rounded by 3 sides (relative to
		the feeding direction).
		2
	1

	1, 2 = 2 mm, 0.08"
Non-closed line	Designate the area with a closed line.

100