Savin 3350DNP, 5450 manual Originals

Originals

Originals

The following original sizes set on the exposure glass (contact glass) can be de-
tected.
		1
Metric version	A3L, B4L, A4KL, B5KL
Inch version	11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL

Under the following conditions, the machine might not detect the original. In this case, select the original image area with the {Edge Erase} key. See ⇒ P.40 “Edge Erase—Erasing Edge Margins”.

•When you use originals with index tabs.

•When you use OHP transparencies or translucent originals.

•When you use dark originals.

•When you use originals with solid images.

•When you use originals other than the sizes described above.

If you do not lift the platen cover more than 30 cm, 12" when you replace origi- nals, the machine might not detect the original.

The maximum original size you can set on the exposure glass (contact glass) is 304.8 × 432 mm, 12" × 17".

If you use originals that have bold letters or solid images at the leading edges, you might get prints with dirty edges. In this case, set the original face down with the widest margin toward the paper delivery tray or raise the printing speed.

Set the original after correction fluid and ink have completely dried. Not taking this precaution could mark the exposure glass (contact glass) and cause marks to be printed.

Basically, set originals as shown below.

R

R

R R

GRSETT0E

When you have an optional memory board and the original is set in a different direction from the print paper, the machine automatically rotates the original image by 90° to match the print paper direction.

13