Savin 3350DNP, 5450 manual With the →

Auto Class Mode— Making Variable Numbers Of Prints From The Same Original Using Stored Data

Auto Class Mode— Making Variable Numbers Of Prints From The Same Original

Using Stored Data

1

Preparation Note

You have to store the number of students in each class with the user tools. See ⇒ P.149 “3-5 Class Enter No.”.

Use the {Class} key to make sets of prints from the same original. The stored numbers of prints are made for each set.

This feature is useful for teachers who frequently make multiple print sets for their classes, ex. notes, handouts, tests etc.

Using a standard print function, the teacher would have to stand by the machine entering the number of prints and pressing the {Print} key for each class. However, Auto Class mode allows you to store the number of students in each class into the ma- chine memory beforehand with the user tools. Then, whenever you need to make print sets for several classes, set your original, select the classes who need prints and press the {Start} key. Print sets will be made contain- ing the correct number of prints for each class.

GRCLAS2E

❒When you set Auto Class mode, Job Separation mode is automati- cally turned on. If you use Job Sep- aration mode with this function, the job separator pulls the top sheet of the each set delivered to the paper delivery tray. This marks the end of each printing set. The

next cycle begins automatically. See ⇒ P.77 “Job Separation—Sepa- rating Printing Sets On The Paper Delivery Tray”.

❒You can cancel Job Separation mode in Auto Class mode with the

user tools (see “Auto Separate” in

⇒ P.139 “4. Mode Setting”).

A Press the {Class} key.

		Speed
Combine	Class	Slow	Fast
1
			TPES160N
B Select [by-class]			with the [→]	or
{}} key.

TPES570E

53