Savin 3350DNP, 5450 manual If Your Machine Does Not Operate As You Want, 165

4.What To Do If Something Goes Wrong

If Your Machine Does Not Operate As You Want

If a malfunction or a misfeed occurs within the machine, the following messages will appear on the panel display.

Message	Meaning
Drum unit is not set.	Make sure that the drum is completely set in position.
Set Drum unit.
Max. quantity: ****	The number of prints exceeds the maximum print
	quantity.
	You can change the maximum number of prints that
	can be made in one operation with the user tools. See
	“Max. Quantity” in ⇒ P.136 “2. Set Operation Modes”.
Min. quantity: ****	The number of prints does not exceed the minimum
	print quantity.
	You can change the minimum number of prints that
	can be made in one operation with the user tools. See
	“Min. Quantity” in ⇒ P.136 “2. Set Operation Modes”.
Set original.	Make prints after you confirm whether there is an
Set command sheet.	original or a command sheet on the exposure glass
	(contact glass).
	Make sure that you have changed the original on the
	exposure glass (contact glass) before pressing the
	{Start} key.
Size of original and paper is	Set a paper size that matches the reproduction ratio
not same.	you have selected and your original.
	The reproduction ratio selected by Auto Magnifica-
	tion Selection mode is too big or too small.

Note

❒You can make prints if you press the {Start} key.

165