Black Line/Stain, Skipped Prints, 188 | Savin 5450, 3350DNP specs

What To Do If Something Goes Wrong

Black Line/Stain

Check the platen cover and clean it if dirty. See ⇒ P.196 “Platen Cover”.

Check the exposure glass (contact glass) and clean it if dirty. See ⇒ P.196 “Exposure glass (contact glass)”.

Check the sheet of the optional docu- ment feeder and clean it if dirty. See

⇒P.197 “Sheet”.

Note

❒When black lines or stains still ap-


4	pear on prints even if you clean the
	above, contact your service repre-
	sentative.

Skipped Prints

If the machine is not used for a long period of time or you change the color drum unit, the ink on the drum might dry causing print quality to deterio- rate. To solve this problem, use Qual- ity Start Mode. See ⇒ P.76 “Quality Start Mode— Regaining The Image Den- sity When The Ink On The Drum Dries”.

When you get skipped print images even if you use Quality Start mode, perform the following procedure.

Reference

See ⇒ P.87 “Changing The Color Drum Unit”.

B While pressing the drum lock, grasp the edge of the master (white part of the master) and peel it off.

TPEH200E

C Return the drum lock to its origi- nal position.

D Set the drum unit until it clicks in position and close the front cover.

TPEH091E

A Open the front cover and pull out the drum unit.

TPEH101E

188

Image 208

Savin 5450, 3350DNP manual Black Line/Stain, Skipped Prints, 188, Open the front cover and pull out the drum unit

Contents

3350DNP/5450 Means Power ON. b means Power OFF Safety During Operation Safety InformationExamples Of Indications RWarning RCaution IiiPage How To Read This Manual Symbols Making Prints Press the Start keySet your originals Set one original face down Press the Proof key Enter the desired number of prints with the Number keys ViiPress the Print key What You Can Do With This Machine 1 % Steps Erasing Edge MarginsInal Saving Ink Storing Your Print Settings In Memory Regaining The Image Density When Ink On The Drum DriesMaking Variable Numbers Of Prints From Different Originals Making Fixed Numbers Of Prints From The Same Original Printing Preset Messages On Your Prints On Line PrintingMaking Color Prints Printing In Two Colors Combining Originals Into One Print With The Memory Board Printing Your Own Messages On Your PrintsXii Table of Contents Selecting a Mode To Match Your Original Same Original Using Stored DataEconomy Mode-Saving Ink On The Drum Dries Printing Using The Optional Document Feeder Color Printing Using The Optional Color DrumMaking a Command Sheet For Make-Up Printing Accessing The User Tools 133 User Tools Menu 135 Clearing Misfeeds 168 User Tool Menus In Detail 148Xvi Where To Put Your Machine 193 Combination Chart 198Poor Printing 185 Operation Notes 189 Xviii Machine Exterior Machine Interior Paper Delivery Side Plates Paper Delivery Side Plate KnobsMaster Eject Unit Front Handle Ink Holder Options Document Feeder This page is intentionally blank Operation Panel Keys Class key Number keys Indicators Panel Display Prev.Next Display Panel Layout Sample Display for Selecting the Original key Operation Printing Paper Operation Originals = 10 mm Preparation For Printing Loading PaperCarefully open the paper feed tray Lift the feed side/end plates Setting Up The Paper Delivery Tray Pull out the paper delivery tray until it stops Lower the paper alignment wings Swing out the guides as shown in the illustrationLift the paper alignment wings Turn on the main switch Press the Enter key User CodesInput your user code 4 digits with the Number keys Standard Printing Lower the platen cover Select the paper type with Remove the prints from the paper delivery tray Close the paper delivery side plate Loading Paper On The Paper Feed Tray Replenishing Paper Remove the paper from the paper feed tray Changing The Paper SizePlace the paper on the paper feed tray Turn off the main switch Closing The Paper Feed And Paper Delivery TraysClose the paper feed tray Push in the paper delivery tray, if necessary Adjust image position using the ~, , , and keys Adjusting Print Image PositionPress the Image = key Adjusting Print Image Density After Making a MasterBefore Making a Master Before Making a Master Tint Mode-Halftone Printing Press the Tint key Changing The Printing Speed Stopping The Machine During a Multi-print Run Change the number of prints or check the completed prints Metric version Inch version Press the Ratio key Make your printsSelect the desired ratio with the ←, →, ~, or key Check the image position of the trial or proof print Original sizes you use Select Auto with the → or key Press the OK key ⇒ P.25 Adjusting Print Image Position Adjust the ratio with the ←, →, ~, or key Zoom-Reducing And Enlarging In 1 % StepsSelect Mag. with the → or Key Enter the desired reproduction ra- tio Enter the ratio with the Num- ber keys Make your prints Press the Enter key Enter The Dimensions Of The Original And Print Paper Entering The Reproduction RatiosEnter The Reproduction Ratios Select Direct. Mag. % with the → or key Adjusting ratios with the ←, →, ~, or key Enter the vertical and horizontal ratio Press the Start key Select Direct. Mag. size with the → or key Image When not using Edge Erase mode Using Edge Erase modeEdge Erase-Erasing Edge Margins Edge Erase-Erasing Edge Margins Printing On Various Kinds Of Paper Printing On Thick PaperPrinting On Thin Paper Press the Ppr. Type key Printing On Envelopes Printing On Special Kinds Of PaperSet the side pads move the side pad levers to as shown Select Special with the ←, →, ~, or key To prevent paper misfeeds Select User 1 or User 2 with the ←, →, ~, or key Selecting a Mode To Match Your Original Photo Mode Printing Letter/Photo Mode Printing Adjust the lightness with the ←, →, ~, or keyPress the Original key Or key Pencil Mode Printing Select Pencil with the ← or ~ key Press the Economy Mode key Economy Mode-Saving Ink Auto Cycle-Making Master And Prints At One Stroke Check the image position Trial or proof printPress the Auto Cycle key Enter the number of prints re Operation Press the Class key Press the Start key With the → Selecting classes with the ~, , , or key Press the OK key Select the desired classes for each grade Check the image position of the trial or proof print Select Manual with the → or key Image Mode With 2 Or More Originals Us- ing The Document Feeder = keys see ⇒ P.25 Adjusting Repeat step N until you have finished printing Select Same-NO.with the ← or ~ key Check the image position is the trial or proof print One-sided Originals → 1 One-sided Print Of 2 Images Combine Originals-Combining Originals Into One PrintOne-sided Originals → 1 One-sided Print Of 4 Images A4K B5K A5K B6K A6K Set the first original face down Enter the number of prints using the Number keysCheck the print paper size and the reproduction ratio Select combine 2 or Quadruple with the ←, →, ~, or key Press the OK key. Press the Start key Make your prints Auto Combine Mode-Having Images Repeated On One Print Print Of 2 ImagesPrint Of 4 Images Press the Combine key ←, →, ~, or key Press the OK key Press the Start key Skip Feed Printing Press the Skip Feed key Skip Feed Printing Storing Your Settings Program-Storing Your Print Settings In MemorySelect Store with the → or key Recalling a Program Protecting a ProgramMake sure that Recall is selected Press the OK key Select the program number you want to recall with the ←, → Press the Cancel key Press the OK key Press the Select key Press the OK key Make your prints Press the Security key Security Mode-Printing Secret DocumentsPress the Yes key Using Quality Start Manually Manual Quality StartAuto Quality Start Press the Quality Start key Job Separation mode, the following limitations apply Press the Job Separator key Saving Master Press the On Line key On Line PrintingRefer to the PC controller man- ual Press the Ppr size key Printing Using The Optional Document Feeder Originals Adjust the guide to the original size Set the aligned originals face up into the document feeder Enter the number of prints with the Number keys Insert the 2 originals face up Select Combine 2 or Quadruple with the ←, →, ~, or key Originals are fed from Press the Print key Making Color Prints Color Printing Using The Optional Color DrumChanging The Color Drum Unit Printing In Two Colors Out the drum unit while holding handle B2 and drum stay B3Slide in the drum unit until it locks in position Lift the drum unit lock lever Exchange the drum unit. See ⇒ Check the image position Press the Print key Printing Area at 23C/73F, 65 % RH Changing The Drum SizeMaster Cut Length Image Rotation-Rotating Original Images Optional Functions Main Features Make-up Printing FeaturesMake-up Modes For Designated Areas Make-up Modes For Outside Designated Areas Save Area mode Area outside the desig Background Patterns Make-up Printing Features Making a Command Sheet For Make-Up Printing Command sheet How To Make a Command Sheet Features 100 Designated area Area recognized Preferred designated area Put the command sheet on top of the original When using the diagonal line method101 When using the closed area method 102 103 Command Sheets And Finished Prints When drawing a command sheet using a diagonal lineWhen drawing a command sheet using a closed line 104 Make-up Printing 105Press the Make-Upkey Make sure that 1 is selected Then press the OK key Ing modes for all the command 106After you have finished designat Sheets, select Outside Area with Make-up Printing With The Optional Document Feeder 107 108 109 Density with the ←, →, ~, or key Original Command sheet No.1 Print Make-up SamplesSample 110 Original Command sheet No.1 Command sheet No.2 Print 111 112 Image Overlay-Merging Images OverlayForm On Line Overlay 114 Set originals in the document feeder 115 Stamping Date-Having The Date Stamped On Your PrintsPress the Stamp key 116 Press the OK key Select the Yes or No keySet your original as shown in the illustration Set your originals as shown in the illustration Stamping-Having Page Numbers Stamped On Your Prints 117 118 Select the Page with the → or Press the OK key 119 Select the desired orientation with the ←, →, ~, or keySet your originals as shown Illustration Set the first original as shown in the illustration Stamping Function-Printing Preset Messages On Your Prints 120Select Stamp with the ←, → ~, or key Select the page to be stamped with the ←, →, ~, or key 121Select the stamping position with the ←, →, ~, or key 122 User Stamping-Printing Your Own Messages On Your PrintsWith ←, →, ~, or key 123 One-sided Originals → 1 One-sided Print Of 8 Images One-sided Originals → 1 One-sided Print Of 16 ImagesRepeating An Image Over The Entire Print 124 One-sided Print Of 4, 8, or 16 Images 125 126 A4 KL B5 KL 127 Press the OK key Select one of the desired combine modes 128Press the OK key Set your originals Repeat-Repeating An Image Over The Entire Print 129 For example, when you use A4 Loriginals and A3Lpaper 130 131 Select Memory Combine with the ← or ~ keyPress the OK key Select Repeat with the ← or ~ key Press the OK key Select the proper reproduction ratio 132 Accessing The User Tools 133Press the User Tools key Select the desired user tools menu. See ⇒ P.135 User Tools 134 Press the User Tools key to re- turn to the Ready condition System User Tools Menu135 Set Operation Modes 136 Initial Setting 137 138 Ratio Mode Setting 139 140 141 11 No. of Skip Feed 142 143 Type of Paper Stamp 144 145 User User Code Set User Code s146 ⇒ P.163 6-2 Reset Counters 147 Time Setting User Tool Menus In DetailReproduction Ratio 148 149 Class Enter NoPress the OK key twice Press the Select key Adjust the erase edge margin Adjust the erase edge margin with the ←, →, ~, or keyMargin Erase Area 150 151 11 No. of Skip FeedPress the Change key 14 No. of Q.start 152 153 Type of Paper Stamp Position154 Select the paper type and misfeed 155 Adjust the horizontal stamp posi Adjust the vertical stamp position156 Tion with the Number keys 157 Position Date Regist. User158 159 When you select When you select P1 1/5Position 160 161 Make/Chg. PatternPress the Enter key Press the OK key twice Check Counter 162 Chg. User Code Reset Counters163 164 Del. User CodePress the OK key Enter the new user code with Number keys If Your Machine Does Not Operate As You Want 165 166 If You Cannot Make Prints As You Want Combine Originals Mode167 Clearing Misfeeds + a Paper Misfeed In The Paper Feed Section168 Remove the misfed paper + a + B Paper Misfeed In The Paper Feed Section 169 When The Master Is Wrapped Around The Drum When Paper Is Wrapped Around The Drum170 Set the drum unit and close the front door When Paper Is Misfed Inside The Machine 171Take out the drum Lower drum unit lock lever B1 Open the front cover Take out the drum 172 + C Paper Misfeed In The Paper Exit SectionSlowly but firmly pull out the misfed paper 173 Open the front door Lower drum unit look lever B1 174 Open the front door Lower drum unit lock lever B1 Open the ADF cover 175Pull out the misfed original gen- tly To prevent original misfeeds 176 When The Open Cover/Unit Indicator M Lights Front DoorDocument Feeder Cover Option 177 178 When The Add Ink Indicator j LightsOpen the front door Pull out the ink holder 179 When The Master End Indicator C Lights 180 181 When The Master Eject Indicator k Lights 182 When Other Indicators Are Lit 183 When The Prints Are Not Delivered In a Neat Stack 184 Dirty Background Poor Printing185 186 Pull out the drum unit Close the front door Turn on the main switch 187 Black Line/Stain Skipped Prints188 Open the front cover and pull out the drum unit General Cautions Operation Notes189 190 Misfed Paper Print Paper191 PC Controller 192 Where To Put Your Machine Environmental ConditionsOptimum environmental conditions Environments to avoid Access to machine Power connection194 195 Main FrameMore than 10 cm More than 60 cm Maintaining Your Machine Main FrameExposure glass contact glass Platen Cover Sheet Optional Document Feeder197 Combination Chart 198 199 200 Main Frame Print Paper Weight Printing AreaPrint Paper Size Leading Edge Margin Dimensions W × D × H WeightMaster Eject Unit Capacity Noise Emission Power Source Power ConsumptionOptional Equipment 204 Original Weight Document FeederOriginal Capacity 205 Consumables 206 Index 207 208 Image Density key 209 On Linekey 210 Security key