Savin 3350DNP, 5450 manual Select Direct. Mag. size with the → or key, Image

Press the [OK] key.

Directional Magnification—Stretching And Squeezing The Image In 1 % Steps

C

D Select [Direct. Mag. (size)] with the [→] or {}} key.

TPES570E

E Press the [OK] key.

The machine will select proper re- production ratios for vertical and horizontal directions.

K Make sure that the original and	1
the print paper are the correct

size.

L Set your original on the exposure glass (contact glass) or in the op- tional document feeder.

M Press the {Start} key.

Program Clear Modes

F Enter the vertical original size with the Number keys and press the {Enter} key.

Program Clear Modes

Enter

Auto Cycle

Proof

Print

Start

Enter

Clear/Stop

Note

Auto Cycle

Proof

Print

Start

TPES120N

Clear/Stop

TPES050N

N Check the image position of the trial or proof print.

Note

❒ If the image position is not cor-
rect, adjust it using	the [Image
=] key (see ⇒ P.25	“Adjusting

❒To change the value entered, press the {Clear/Stop} key and enter the new value.

❒Up to 999 mm, 99.9" can be en- tered.

G Enter the vertical print size with the Number keys and press the {Enter} key.

H Enter the horizontal original size with the Number keys and press the {Enter} key.

I Enter the horizontal print size with the Number keys.

J Press the [OK] key.

Print Image Position”).

O Make your prints.

39