Savin 5450, 3350DNP manual Skip Feed Printing, Press the Skip Feed key

OPERATION

Skip Feed Printing

If the backs of prints are dirty, you

1 can increase the time between two prints using the {Skip Feed} key. By default, when one sheet of paper is fed the drum rotates once. However, you can select the number of rotations of the drum. This gives you the chance to remove prints one by one from the paper delivery tray or insert one sheet of paper between two prints. If you use this function, you can also use paper longer than 432 mm, 17.0" in spite of the maximum length limitations of paper.

Note

B Press the {Skip Feed} key.

	Stamp	Image Density
		Lighter	On Line
		Normal
		Darker 1
	Make-Up	Darker 2
	Overlay	Tint
Skip Feed	Edge Erase	Economy Mode	Job Separator
			TPES180N

C If necessary, select the number of rotations of the drum while one sheet of paper is fed with the [←], [→], {~}, or {}} key.

❒Two rotations while one sheet of paper is fed is selected as a default. You can change this default setting

with the user tools. See “No. of Skip Feed” in ⇒ P.139 “4. Mode Set- ting”.

❒The maximum length of paper in Skip Feed mode is 460 mm, 18.1".

TPES530E

❒When you use paper longer than 432 mm, 17.0", completed prints will not be delivered to the paper delivery tray properly, so lower the end plate and receive complet- ed prints by hand.

A Set your original on the exposure glass (contact glass) or in the op- tional document feeder.

Note

❒You can also select the number of rotations with the Number keys.

❒You can select from 2 to 9 rota- tions.

❒By default, the machine asks you to confirm the number of rotations. You can have this step omitted by adjusting the user

tool settings. See “No. of Skip Feed” in ⇒ P.139 “4. Mode Set- ting”.

D Press the [OK] key.

70