Savin 3350DNP, 5450 manual Press the Class key

All Class Mode—Making Variable Numbers Of Prints From The Same Original Using All Stored Data

All Class Mode—Making Variable Numbers Of Prints From The Same Original

Using All Stored Data

1

Preparation Note

You have to store the number of students in each class with the user tools. See ⇒ P.149 “3-5 Class Enter No.”.

Use the {Class} key to make sets of prints from the same original. All the stored numbers of prints are made for each set.

This feature is useful for teachers who frequently make multiple print sets for all the classes. Ex. notes, handouts, test etc.

Using a standard print function, the teacher would have to stand by the machine entering the number of prints and pressing the {Print} key for each class. However, All Class mode allows you to store the number of stu- dents in each class into the machine memory beforehand with the user tools. Then, whenever you need to make print sets for all the classes, set your original, select [All] and press the {Start} key. Print sets will be made containing the correct number of prints for each class.

GRCLAS2E

❒When you set All Class mode, Job Separation mode is automatically turned on. If you use Job Separa- tion mode with this function, the job separator pulls the top sheet of the each set delivered to the paper delivery tray. This marks the end

of each printing set. The next cycle begins automatically. See ⇒ P.77 “Job Separation—Separating Print- ing Sets On The Paper Delivery Tray”

❒You can cancel Job Separation mode in All Class mode with the

user tools (see “Auto Separate” in

⇒ P.139 “4. Mode Setting”).

A Press the {Class} key.

		Speed
Combine	Class	Slow	Fast
1
			TPES160N

B Make sure that the [All] is select- ed.

C Press the [OK] key.

D Set one original on the exposure glass (contact glass) or in the op- tional document feeder.

51