Savin 5450, 3350DNP manual Adjusting ratios with the ←, →, ~, or key

OPERATION

F Enter the vertical and horizontal ratio.

J Press the {Start} key.

Program Clear Modes

1

Note

❒To change the value entered, press the {Clear/Stop} key and enter the new value.

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES050N

Adjusting ratios with the [←], [→], {~}, or {}} key

A Adjust the vertical ratio with the [←], [→], {~}, or {}} key.

B Press the {{} key.

C Adjust the horizontal ratio with the [←], [→], {~}, or {}} key.

K Check the image position of the trial or proof print.

Note

❒If the image position is not cor-

rect, adjust it using the [Image =] key (see ⇒ P.25 “Adjusting Print Image Position”).

L Make your prints.

Entering the ratios with the number keys

A Enter the vertical ratio with the

Number keys.

B Press the {Enter} key.

C Enter the horizontal ratio with the Number keys.

Entering The Dimensions Of The Original And Print Paper

A Press the [Ratio] key.

D Press the {Enter} key.

G Press the [OK] key.

H Make sure that the original and the print paper are the correct size.

I Set your original on the exposure glass (contact glass) or in the op- tional document feeder.

TPES570E

B Select [Mag.] with the [→] or {}} key.

TPES570E

38