Savin 5450, 3350DNP manual Using Quality Start Manually, Manual Quality Start, Auto Quality Start

1

OPERATION

Quality Start Mode— Regaining The

Image Density When The Ink On The Drum

Dries

If the machine is not used for a long period of time or you change the color drum unit, the ink on the drum might dry causing print quality to deterio- rate. To solve this problem, you can have the machine carry out a few idle spins of the drum before a print run. This will restore image quality and save you having to make a repeat print run.

You can use this feature in two ways:

❖ Manual Quality Start

Choose Quality Start for the next

print run manually using the

{Quality Start} key.

❖ Auto Quality Start

Have the machine check automati-

cally how long ago the machine

was used before each print run. If

the machine has not been used for

a long time, Quality Start will be

Using Quality Start Manually

A Press the {Quality Start} key.

	Stamp	Image Density
		Lighter	On Line
		Normal
		Darker 1
	Make-Up	Darker 2
	Overlay	Tint
Skip Feed	Edge Erase	Economy Mode	Job Separator
			TPES210N

B Set your original on the exposure glass (contact glass) or in the op- tional document feeder.

C Press the {Start} key.

The drum unit idles.

Program Clear Modes

used for the print job. By default,

Auto Quality Start mode is on. You

can turn it off with the user tools.

See “Setting Q. start” in ⇒ P.139

“4. Mode Setting”.

Note

❒ You can change the number of

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES050N

spins in Manual Quality Start

mode with the user tools. See

“Idling for Q.start” in ⇒ P.139 “4.

Mode Setting”.

❒ You can change the number of

spins after the fixed time period

has passed in Auto Quality Start

mode with the user tools. See “No.

of Q.start” in ⇒ P.139 “4. Mode Set-

ting”.

D Make your prints.

76