Savin 5450, 3350DNP manual Set the aligned originals face up into the document feeder

OPTIONAL FUNCTIONS

Basically, set originals as shown be- low.

	R
2	R

GRSETT1E

When you have an optional memory board and the original is set in a dif- ferent direction from the print paper, the machine automatically rotates the original image by 90° to match the print paper direction.

You cannot set originals of different sizes at the same time.

When you use thin originals, set one original at a time in the document feeder or set them on the exposure glass (contact glass).

The first 10 mm, 0.4", of the leading edge and the last 2 mm, 0.08" of the trailing edge cannot be printed. Make sure the leading edge margin is at least 10 mm, 0.4", and the trailing edge margin is at least 2 mm, 0.08".

B Set the aligned originals face up into the document feeder.

TPEH350E

Limitation

❒Approximately 30 originals (80 g/m2, 21 lb) can be inserted at one time in the document feed- er. The first (top) original will be fed first.

Note

❒To avoid a multi-sheet feed, shuffle the originals before set- ting them in the document feed- er.

❒The guides must fit snugly against both sides of the stack.

C Adjust any print settings as nec- essary, then press the {Start} key.

Program Clear Modes

Do not stack originals above the limit mark.

Setting Originals In The Document Feeder

A Adjust the guide to the original size.

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES050N

82