Savin 5450, 3350DNP manual Set User Code s, 146

3

USER TOOLS

No.	Mode	Description
13	Direction	You can select the page numbering direction at power on in
	(Page)	Page Stamping mode.
		Note
		❒ Default:
		• When you select [P1, P2] or [1/5, 2/5] with the “Type
		(Page)” user tool: Upper right
		• When you select [-1-, -2-] with the “Type (Page)” user
		tool: Down center
14	Position (Page)	You can edit the preset page numbering position co-ordi-
		nates.

Note

❒Default: See ⇒ P.160 “5-14 Position (Page)”.

❒Available settings: See ⇒ P.160 “5-14 Position (Page)”.

Reference

For how to adjust the page numbering position, see ⇒

P.160 “5-14 Position (Page)”.

15	Make/Chg.	Make your own background pattern in Make-up mode.
	Pattern	Note

❒You can edit the 40 preset patterns.

Reference

For how to change the background pattern, see ⇒ P.161 “5-15 Make/Chg. Pattern”.

6.Set User Code (s)

❖User Code

If the machine is set to use the User Code function, operators must input their user codes before the machine can operate. The machine keeps count of the number of copies made under each user code. Turn on User Code mode with the “Set User Code (s)” user tool. You can also turn on Key Operator Code mode. In Key Opera- tor Code mode, only the selected key operator can use all the functions below.

1

Check Counter

You can check the number of masters and copies made under each user code.

Reference

For how to check the number of masters and copies, see ⇒ P.162 “6-1 Check Counter”.

146