Savin 5450, 3350DNP manual 106, After you have finished designat, Ing modes for all the command

OPTIONAL FUNCTIONS

❒To change the value entered, press the {Clear/Stop} key and enter the new value.

	J After you have finished designat-
	ing modes for all the command
	sheets, select [Outside Area] with
	the [←], [→], {~}, or {}} key.
2	Then press the [OK] key.

TPES530E

K Select the mode for the outside

area with the [←], [→], {~}, or {}} key.

TPES530E

L Press the [OK] key.

age density with the [←], [→], {~}, or {}} key.

TPES530E

Note

❒Four coarseness settings are available:

•Setting 4: coarsest

•Setting 3: coarser than setting 2

•Setting 2: coarser than setting 1

•Setting 1: coarser than the standard setting

N Press the [OK] key.

O Set the first command sheet face down on the exposure glass (con- tact glass) and press the {Start} key.

Program Clear Modes

Note

❒ When you select Photo mode

for both inside and outside ar-

eas, you cannot select different

coarseness and image density.

❒ When you want to confirm your

settings, press the {Make-Up}

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES050N

key twice. Then press the [OK]

key repeatedly until the panel

display reaches the setting you

want to confirm.

M If you have selected Photo mode, select the coarseness and the im-

The beeper sounds after the com- mand sheet is scanned.

Note

❒Repeat step O for the other com- mand sheets.

P Set the original face down on the exposure glass (contact glass) and press the {Start} key.

106