Savin 5450, 3350DNP Adjusting Print Image Density, After Making a Master, Before Making a Master

OPERATION

Adjusting Print Image Density

You can adjust the print image densi-

1 ty to suit your needs. There are two ways to do this:

❖Before Making A Master

Use the {Image Density} key.

After Making A Master

A To increase the image density, press the {W} key. To reduce the image density, press the {V} key.

❖After Making A Master

Use the {Speed} keys.

Before Making A Master

A Press the {Image Density}key to ad- just the image density.

	Stamp	Image Density
		Lighter	On Line
		Normal
		Darker 1
	Make-Up	Darker 2
	Overlay	Tint
Skip Feed	Edge Erase	Economy Mode	Job Separator
			TPES340N

		Speed
Combine	Class	Slow	Fast
1
			TPES100N

Note

❒The faster the printing speed be- comes, the lighter the printing density is. If you want darker prints, decrease the printing speed.

B Press the {Start} key.

Program Clear Modes

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES050N

26