Panel Display, Prev.Next | Savin 3350DNP, 5450 guide

Panel Display

The panel display shows operational status, error messages, and function menus.

1

2

3

4

TPES658N

1.The function items for the select- ed function are displayed.

2.These keys correspond to the item on the display.

Press a relevant key to select a function.

•To move the selection to the left, press the [←] key.

Important

•To move the selection to the right, press the [→] key.

3.Displays operational status or messages.

4.Displays items which can be se- lected or specified.

❒Do not apply a strong shock or force of about 30 N (about 3 kgf) or more to the panel display. Otherwise, the display might be damaged.

Note

❒When you select or specify an item on the panel display, it is highlighted, ex. Auto . Keys appearing as a OK cannot be used.

❒Common keys:

[OK]	Sets a selected function or entered value.

[Cancel]	Cancels a selected function or entered value and returns
	to the previous display.

[Prev.][Next]	When there are too many items to fit on the display, use
	these keys to move between pages.

{~} {}}{}{{}[←][→]	Press to highlight the selection you wish to select.

[Select]	Sets a slected value.

[Exit]	Turns off the message panel display and returns to the
	previous display.

9

Image 29

Savin 3350DNP, 5450 manual Panel Display, Prev.Next

Contents

3350DNP/5450 Means Power ON. b means Power OFF Examples Of Indications Safety InformationSafety During Operation RWarning Iii RCautionPage Symbols How To Read This Manual Press the Start key Making PrintsSet your originals Set one original face down Press the Proof key Press the Print key ViiEnter the desired number of prints with the Number keys What You Can Do With This Machine Erasing Edge Margins 1 % StepsInal Saving Ink Regaining The Image Density When Ink On The Drum Dries Storing Your Print Settings In MemoryMaking Variable Numbers Of Prints From Different Originals Making Fixed Numbers Of Prints From The Same Original On Line Printing Printing Preset Messages On Your PrintsMaking Color Prints Printing In Two Colors Xii Printing Your Own Messages On Your PrintsCombining Originals Into One Print With The Memory Board Table of Contents Same Original Using Stored Data Selecting a Mode To Match Your OriginalEconomy Mode-Saving Ink On The Drum Dries Color Printing Using The Optional Color Drum Printing Using The Optional Document FeederMaking a Command Sheet For Make-Up Printing Accessing The User Tools 133 User Tools Menu 135 Xvi User Tool Menus In Detail 148Clearing Misfeeds 168 Combination Chart 198 Where To Put Your Machine 193Poor Printing 185 Operation Notes 189 Xviii Machine Exterior Machine Interior Paper Delivery Side Plate Knobs Paper Delivery Side PlatesMaster Eject Unit Front Handle Ink Holder Document Feeder Options This page is intentionally blank Keys Operation Panel Number keys Class key Indicators Prev.Next Panel Display Sample Display for Selecting the Original key Display Panel Layout Printing Paper Operation Operation Originals = 10 mm Loading Paper Preparation For PrintingCarefully open the paper feed tray Lift the feed side/end plates Pull out the paper delivery tray until it stops Setting Up The Paper Delivery Tray Lift the paper alignment wings Swing out the guides as shown in the illustrationLower the paper alignment wings Turn on the main switch Input your user code 4 digits with the Number keys User CodesPress the Enter key Lower the platen cover Select the paper type with Standard Printing Close the paper delivery side plate Remove the prints from the paper delivery tray Replenishing Paper Loading Paper On The Paper Feed Tray Place the paper on the paper feed tray Changing The Paper SizeRemove the paper from the paper feed tray Closing The Paper Feed And Paper Delivery Trays Turn off the main switchClose the paper feed tray Push in the paper delivery tray, if necessary Press the Image = key Adjusting Print Image PositionAdjust image position using the ~, , , and keys After Making a Master Adjusting Print Image DensityBefore Making a Master Before Making a Master Press the Tint key Tint Mode-Halftone Printing Changing The Printing Speed Change the number of prints or check the completed prints Stopping The Machine During a Multi-print Run Inch version Metric version Make your prints Press the Ratio keySelect the desired ratio with the ←, →, ~, or key Check the image position of the trial or proof print Original sizes you use Press the OK key Select Auto with the → or key ⇒ P.25 Adjusting Print Image Position Zoom-Reducing And Enlarging In 1 % Steps Adjust the ratio with the ←, →, ~, or keySelect Mag. with the → or Key Enter the desired reproduction ra- tio Make your prints Press the Enter key Enter the ratio with the Num- ber keys Entering The Reproduction Ratios Enter The Dimensions Of The Original And Print PaperEnter The Reproduction Ratios Select Direct. Mag. % with the → or key Enter the vertical and horizontal ratio Press the Start key Adjusting ratios with the ←, →, ~, or key Image Select Direct. Mag. size with the → or key Edge Erase-Erasing Edge Margins Using Edge Erase modeWhen not using Edge Erase mode Edge Erase-Erasing Edge Margins Printing On Thick Paper Printing On Various Kinds Of PaperPrinting On Thin Paper Press the Ppr. Type key Printing On Special Kinds Of Paper Printing On EnvelopesSet the side pads move the side pad levers to as shown Select Special with the ←, →, ~, or key Select User 1 or User 2 with the ←, →, ~, or key To prevent paper misfeeds Photo Mode Printing Selecting a Mode To Match Your Original Adjust the lightness with the ←, →, ~, or key Letter/Photo Mode PrintingPress the Original key Or key Select Pencil with the ← or ~ key Pencil Mode Printing Economy Mode-Saving Ink Press the Economy Mode key Check the image position Trial or proof print Auto Cycle-Making Master And Prints At One StrokePress the Auto Cycle key Enter the number of prints re Operation Press the Class key Press the Start key With the → Press the OK key Select the desired classes for each grade Selecting classes with the ~, , , or key Check the image position of the trial or proof print Select Manual with the → or key Image Mode With 2 Or More Originals Us- ing The Document Feeder = keys see ⇒ P.25 Adjusting Repeat step N until you have finished printing ~ key Select Same-NO.with the ← or Check the image position is the trial or proof print One-sided Originals → 1 One-sided Print Of 4 Images Combine Originals-Combining Originals Into One PrintOne-sided Originals → 1 One-sided Print Of 2 Images A4K B5K A5K B6K A6K Check the print paper size and the reproduction ratio Enter the number of prints using the Number keysSet the first original face down Press the OK key. Press the Start key Select combine 2 or Quadruple with the ←, →, ~, or key Make your prints Print Of 2 Images Auto Combine Mode-Having Images Repeated On One PrintPrint Of 4 Images Press the Combine key Press the OK key Press the Start key ←, →, ~, or key Press the Skip Feed key Skip Feed Printing Skip Feed Printing Select Store with the → or key Program-Storing Your Print Settings In MemoryStoring Your Settings Protecting a Program Recalling a ProgramMake sure that Recall is selected Press the OK key Select the program number you want to recall with the ←, → Press the Select key Press the OK key Press the Cancel key Press the OK key Press the Yes key Security Mode-Printing Secret DocumentsMake your prints Press the Security key Manual Quality Start Using Quality Start ManuallyAuto Quality Start Press the Quality Start key Job Separation mode, the following limitations apply Press the Job Separator key Saving Master Refer to the PC controller man- ual Press the Ppr size key On Line PrintingPress the On Line key Originals Printing Using The Optional Document Feeder Set the aligned originals face up into the document feeder Adjust the guide to the original size Insert the 2 originals face up Enter the number of prints with the Number keys Select Combine 2 or Quadruple with the ←, →, ~, or key Originals are fed from Press the Print key Changing The Color Drum Unit Color Printing Using The Optional Color DrumMaking Color Prints Out the drum unit while holding handle B2 and drum stay B3 Printing In Two ColorsSlide in the drum unit until it locks in position Lift the drum unit lock lever Check the image position Press the Print key Exchange the drum unit. See ⇒ Master Cut Length Changing The Drum SizePrinting Area at 23C/73F, 65 % RH Image Rotation-Rotating Original Images Optional Functions Make-up Modes For Designated Areas Make-up Printing FeaturesMain Features Make-up Modes For Outside Designated Areas Save Area mode Area outside the desig Background Patterns Make-up Printing Features Command sheet Making a Command Sheet For Make-Up Printing Features How To Make a Command Sheet Designated area Area recognized Preferred designated area 100 101 When using the diagonal line methodPut the command sheet on top of the original 102 When using the closed area method 103 When drawing a command sheet using a diagonal line Command Sheets And Finished PrintsWhen drawing a command sheet using a closed line 104 105 Make-up PrintingPress the Make-Upkey Make sure that 1 is selected Then press the OK key 106 Ing modes for all the commandAfter you have finished designat Sheets, select Outside Area with 107 Make-up Printing With The Optional Document Feeder 108 Density with the ←, →, ~, or key 109 Make-up Samples Original Command sheet No.1 PrintSample 110 111 Original Command sheet No.1 Command sheet No.2 Print 112 Overlay Image Overlay-Merging ImagesForm On Line Overlay Set originals in the document feeder 114 Press the Stamp key Stamping Date-Having The Date Stamped On Your Prints115 Press the OK key Select the Yes or No key 116Set your original as shown in the illustration Set your originals as shown in the illustration 117 Stamping-Having Page Numbers Stamped On Your Prints Select the Page with the → or Press the OK key 118 Select the desired orientation with the ←, →, ~, or key 119Set your originals as shown Illustration Set the first original as shown in the illustration 120 Stamping Function-Printing Preset Messages On Your PrintsSelect Stamp with the ←, → ~, or key Select the stamping position with the ←, →, ~, or key 121Select the page to be stamped with the ←, →, ~, or key With ←, →, ~, or key User Stamping-Printing Your Own Messages On Your Prints122 123 One-sided Originals → 1 One-sided Print Of 16 Images One-sided Originals → 1 One-sided Print Of 8 ImagesRepeating An Image Over The Entire Print 124 125 One-sided Print Of 4, 8, or 16 Images A4 KL B5 KL 126 127 Press the OK key Set your originals 128Press the OK key Select one of the desired combine modes 129 Repeat-Repeating An Image Over The Entire Print 130 For example, when you use A4 Loriginals and A3Lpaper Select Memory Combine with the ← or ~ key 131Press the OK key Select Repeat with the ← or ~ key Press the OK key Select the proper reproduction ratio 132 133 Accessing The User ToolsPress the User Tools key Select the desired user tools menu. See ⇒ P.135 User Tools Press the User Tools key to re- turn to the Ready condition 134 135 User Tools MenuSystem 136 Set Operation Modes 137 Initial Setting Ratio 138 139 Mode Setting 140 11 No. of Skip Feed 141 142 Type of Paper 143 144 Stamp User 145 146 Set User Code sUser Code 147 ⇒ P.163 6-2 Reset Counters User Tool Menus In Detail Time SettingReproduction Ratio 148 Press the OK key twice Class Enter No149 Adjust the erase edge margin with the ←, →, ~, or key Press the Select key Adjust the erase edge marginMargin Erase Area 150 Press the Change key 11 No. of Skip Feed151 152 14 No. of Q.start 153 Stamp Position Type of Paper154 Select the paper type and misfeed 155 Adjust the vertical stamp position Adjust the horizontal stamp posi156 Tion with the Number keys 157 158 Regist. UserPosition Date 159 When you select P1 1/5 When you selectPosition 160 Press the Enter key Press the OK key twice Make/Chg. Pattern161 162 Check Counter 163 Reset CountersChg. User Code Press the OK key Enter the new user code with Number keys Del. User Code164 165 If Your Machine Does Not Operate As You Want 166 167 Combine Originals ModeIf You Cannot Make Prints As You Want + a Paper Misfeed In The Paper Feed Section Clearing Misfeeds168 Remove the misfed paper 169 + a + B Paper Misfeed In The Paper Feed Section When Paper Is Wrapped Around The Drum When The Master Is Wrapped Around The Drum170 Set the drum unit and close the front door 171 When Paper Is Misfed Inside The MachineTake out the drum Lower drum unit lock lever B1 Open the front cover Take out the drum Slowly but firmly pull out the misfed paper + C Paper Misfeed In The Paper Exit Section172 Open the front door Lower drum unit look lever B1 173 Open the front door Lower drum unit lock lever B1 174 Pull out the misfed original gen- tly 175Open the ADF cover 176 To prevent original misfeeds Front Door When The Open Cover/Unit Indicator M LightsDocument Feeder Cover Option 177 Open the front door Pull out the ink holder When The Add Ink Indicator j Lights178 179 180 When The Master End Indicator C Lights 181 182 When The Master Eject Indicator k Lights 183 When Other Indicators Are Lit 184 When The Prints Are Not Delivered In a Neat Stack 185 Poor PrintingDirty Background Pull out the drum unit 186 187 Close the front door Turn on the main switch Skipped Prints Black Line/Stain188 Open the front cover and pull out the drum unit 189 Operation NotesGeneral Cautions 190 191 Print PaperMisfed Paper 192 PC Controller Environmental Conditions Where To Put Your MachineOptimum environmental conditions Environments to avoid 194 Power connectionAccess to machine More than 10 cm More than 60 cm Main Frame195 Main Frame Maintaining Your MachineExposure glass contact glass Platen Cover 197 Optional Document FeederSheet 198 Combination Chart 199 200 Main Frame Printing Area Print Paper WeightPrint Paper Size Leading Edge Margin Weight Dimensions W × D × HMaster Eject Unit Capacity Noise Emission Power Consumption Power SourceOptional Equipment 204 Document Feeder Original WeightOriginal Capacity 205 206 Consumables 207 Index Image Density key 208 On Linekey 209 Security key 210