Auto Class Mode— Making Variable Numbers Of Prints From The Same Original Using Stored Data

key and press the [Cancel] key.

Repeat steps A and B until you have finished selecting

all the desired classes.

1

E Press the [OK] key.

F Set one original on the exposure glass (contact glass) or in the op- tional document feeder.

G Press the {Start} key.

Program

Clear Modes

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES050N

H Check the image position of the trial or proof print.

Note

If the image position is not cor-

rect, adjust it using the [Image =] key (see ⇒ P.25 “Adjusting Print Image Position”).

I Make your prints.

55

Page 75
Image 75
Savin 3350DNP, 5450 manual Check the image position of the trial or proof print