Savin 5450, 3350DNP manual 142

3

USER TOOLS

No.	Mode	Description
15	Deflector Angle	You can change the angle of the wing guide depending on
		the paper type you use.
		Note
		❒ Default: Auto
		❒ Available settings:
		• Up (Select this setting when standard thickness or
		thin paper misfeeds at the paper exit section occur
		frequently.)
		• Down (Select this setting when A4 – B5, 81/ " × 11"
		2
		thick paper is not delivered properly to the paper de-
		livery tray.)
16	Manual Class	When you do not use the Job Separation function, you can
		select the machine's condition after each printing set is fed
		out to the paper delivery tray.
		Note
		❒ Default: Stop
		❒ Available settings:
		• Start printing automatically (After the last page of
		each printing set is fed out to the paper delivery tray,
		the machine stops for a few seconds. Then, the next
		cycle begins.)
		• Stop (After the last page of each printing set is fed out
		to the paper delivery tray, the machine stops. If you
		press the {Print} key, the next cycle begins.)
17	Auto Separate	Specifies whether Job Separation mode is automatically
		carried out when you make prints in All Class, Auto Class,
		Manual Class, or Class mode.

Note

❒Default: ON

142