Savin 3350DNP Remove the prints from the paper delivery tray, Close the paper delivery side plate

Standard Printing

G Press the {Proof} key and check the image density and the image position of the proof print.

Program Clear Modes

I Open the paper delivery side plate of the operation panel side.

1

Enter

Clear/Stop

Note

Auto Cycle

Proof

Print

Start

TPES060N

TPEH050E

Note

❒ You cannot open the side plate

❒If the image position is not cor-

rect, adjust it using the [Image =] key. See ⇒ P.25 “Adjusting Print Image Position”.

❒If the image density is slightly

dark or light, adjust the image density using the {Speed} keys. See ⇒ P.26 “Adjusting Print Im- age Density”.

H Press the {Print} key.

Program Clear Modes

on the opposite side.

J Remove the prints from the paper delivery tray.

TPEH060E

Enter

Clear/Stop

Note

Auto Cycle

Proof

Print

Start

TPES070N

Note

❒To return the machine to the ini-

tial condition after printing, press the {Clear Modes} key.

K Close the paper delivery side plate.

❒After printing is completed, the same number of prints is auto- matically set for the next job.

❒To stop the machine during a multi-print run, press the {Clear/ Stop} key.

21