Savin 3350DNP, 5450 Exchange the drum unit. See ⇒, Check the image position Press the Print key

Color Printing Using The Optional Color Drum

A Prepare the two originals. Set the first original on the exposure glass (contact glass).

TPEH270E

B Enter the number of prints with the Number keys.

Program Clear Modes

E Press the {Print} key.

Program	Clear Modes
		Auto Cycle
		Proof
		Print
	Enter	2
	Start
Clear/Stop
		TPES070N

F Remove the prints from the paper delivery tray and set them on the paper feed tray again as shown in the illustration.

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES040N

C Press the {Start} key.

Program Clear Modes

G Exchange the drum unit. See ⇒

P.87 “Changing The Color Drum Unit”.

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES050N

D Check the image position of the trial or proof print.

Note

H Set the second original and press the {Start} key.

❒If the image position is not cor-

rect, adjust it using the [Image =] key (see ⇒ P.25 “Adjusting Print Image Position”).

I Check the image position.

J Press the {Print} key.

89