Savin 3350DNP, 5450 Auto Cycle-Making Master And Prints At One Stroke, Press the Auto Cycle key

Auto Cycle—Making Master And Prints At One Stroke

Auto Cycle—Making Master And Prints At One Stroke

Use the {Auto Cycle} key to process masters and make prints at one stroke.

Note

❒When you use the optional docu- ment feeder, it is not necessary to place originals one by one. All originals are fed and prints are

completed after you press the

{Start} key.

D Check the image position of the	1
trial or proof print.

Note

❒If the image position is not cor-

rect, adjust it using the [Image =] key (see ⇒ P.25 “Adjusting Print Image Position”).

E Press the {Auto Cycle} key.

Program Clear Modes

A Set your original on the exposure glass (contact glass) or in the op- tional document feeder.

Note

❒You can set up to 30 originals into the optional document feeder.

B Enter the number of prints re-

Enter

Clear/Stop

Note

Auto Cycle

Proof

Print

Start

TPES150N

quired with the Number keys.

Program Clear Modes

❒ If you press the		{Auto	Cycle}
key, you	cannot	make	proof
prints by	pressing the {Proof}

Enter

Clear/Stop

Auto Cycle

Proof

Print

Start

TPES040N

key.

F Press the {Print} key.

Program Clear Modes

Auto Cycle

Proof

C Press the {Start} key.

Program Clear Modes

Enter

Clear/Stop

Print

Start

Auto Cycle

Proof

Print

Note

TPES070N

Enter

Clear/Stop

Start

TPES050N

❒Repeat steps A through C until all originals are printed when you are setting originals on the exposure glass (contact glass).

49